At Islamabad Airport, the eSIM task should normally be activation, not installation. Install the profile on reliable Wi-Fi before flying when the plan permits.
NoveSIM Pakistan plans are data-only and do not provide a local number.
This support page covers the immediate line handover; installation and wider troubleshooting remain separate tasks.
Quick answer: Turn on the installed Pakistan line, select it for Mobile Data, enable Data Roaming on it, keep primary-line roaming and data switching off, then wait several minutes for automatic registration.
Top Pakistan eSIMs
Pakistan eSIM
Fixed
1 GB, 7 days€ 3.992 GB, 15 days€ 7.103 GB, 30 days€ 10.20Unlimited
Unlimited, 1 day€ 5.32Unlimited, 3 days€ 15.09Unlimited, 5 days€ 23.96
Complete the Arrival Handover
- Turn off Airplane Mode when permitted.
- Enable the Pakistan eSIM.
- Select it for Mobile Data.
- Enable Data Roaming on the travel line.
- Disable home-line roaming and data switching.
- Wait before changing network settings.
Test with Wi-Fi Off
Open two normal websites or apps. Confirm that the active data indicator belongs to the Pakistan line.
If No Network Appears
Toggle Airplane Mode for 30 seconds, restart if needed and test near a window or outside the terminal. Keep Network Selection Automatic first.
If Signal Appears without Data
Check allowance and validity, then use data.esim only when manual APN entry is required. Follow the APN guide.
Do Not Delete the Profile
Use the reversible diagnostic flow. The full arrival context is in Internet at Islamabad Airport.
Related Articles
FAQ
Should I install the eSIM after landing?
Install before departure on reliable Wi-Fi when the plan permits, leaving only activation for arrival.
Should Data Roaming be on?
Enable it on the travel eSIM and keep it off on the home line.
What APN should I use?
Use data.esim only when manual entry is required.
Should I scan the QR code again?
No if the profile already appears. Keep it installed and troubleshoot the settings.
Final Recommendation
Arrive with the profile installed and labelled.
Assign data and roaming to the Pakistan line and allow time for registration.
Keep the profile intact and move to the structured diagnostic flow if the connection remains unavailable.