Manual network selection for a Uruguay eSIM is a diagnostic step to try after the line is enabled, selected for data, roaming is on and Automatic registration has failed. It is not the recommended everyday setting.
A phone may display networks that the purchased plan cannot use. Seeing a name in the list does not prove that registration is permitted, and a rejected selection does not mean the eSIM profile is damaged.
NoveSIM Uruguay plans are data-only and do not provide a local number, traditional calls or SMS. Test a successful registration by loading a fresh webpage with Wi-Fi off.
Quick answer: Start on Automatic, refresh the connection and wait. If support or the troubleshooting sequence calls for a manual test, select only an available network permitted by the plan, record the result and return to Automatic after testing.
Top Uruguay eSIMs
Uruguay eSIM
Fixed
1 GB, 7 days€ 4.882 GB, 15 days€ 8.873 GB, 30 days€ 12.42Unlimited
Unlimited, 1 day€ 6.66Unlimited, 3 days€ 18.19Unlimited, 5 days€ 29.28
When Manual Selection Is Worth Trying
- The Uruguay eSIM is installed and enabled.
- It is selected for Mobile Data.
- Data Roaming is on for the travel line.
- The plan should be active and still has an allowance.
- Automatic selection has had several minutes to register.
- You are in a location where service is reasonably expected.
Complete the ordered checks in the Uruguay eSIM troubleshooting guide first. Manual selection cannot fix an incompatible phone, expired plan, missing profile or exhausted allowance.
Before Manual Network Selection for a Uruguay eSIM
- Turn Wi-Fi off and verify that the travel line is the selected data SIM.
- Enable Data Roaming on the Uruguay eSIM.
- Disable home-line roaming and automatic data switching.
- Toggle Airplane Mode for about 30 seconds.
- Leave Network Selection on Automatic and wait several minutes.
- Move to an open, safe location if the problem occurs indoors.
Review the active allowance and coverage details on the Uruguay eSIM page. Available networks, 4G or 5G, speed and registration depend on the plan, device, location and local conditions.
How to Select a Network on iPhone
- Open Settings.
- Tap Mobile Service or Cellular.
- Select the Uruguay eSIM.
- Open Network Selection.
- Turn Automatic off and wait for the list to populate.
- Choose a network allowed by the plan or specified by support.
- Wait for registration and test a webpage with Wi-Fi off.
- Return to Automatic after the diagnostic test.
The list can take time to appear. Do not tap every entry rapidly; allow each permitted selection enough time to return a clear success or rejection.
How to Select a Network on Android
- Open Settings.
- Choose Network & Internet, Connections or the equivalent menu.
- Select the Uruguay eSIM and open Mobile Networks.
- Disable Select Automatically.
- Wait for the available-network scan to finish.
- Select a permitted network and allow time for registration.
- Test a new webpage, then restore automatic selection.
Menu names differ by manufacturer and software version. Confirm the exact handset on the compatible-device list rather than using instructions for a different model.
How to Interpret the Result
| Result | Likely meaning |
|---|---|
| Registered and data works | The line can use that network at the current location |
| Registered but no data | Check allowance, data-line selection and APN |
| Registration rejected | The network may not be permitted by the plan or available for roaming |
| No networks appear | Check location, radio state, device and local service conditions |
A successful manual test does not guarantee that keeping the network pinned is best for travel. Automatic selection can adapt when you move to another part of Uruguay.
When to Check the APN
APN configuration affects data after network registration. If a network name and signal appear but no webpage loads, verify the allowance and use data.esim only when manual APN entry is required.
Do not copy a domestic operator’s APN. Follow the Uruguay eSIM APN guide and leave unrelated fields unchanged.
Return to Automatic After the Test
A manually pinned network may become unavailable as you travel, causing the phone to remain offline instead of choosing another permitted partner. Return the control to Automatic unless NoveSIM Support gives a specific temporary instruction.
Do not delete the installed eSIM if manual registration fails. Keep the profile and contact NoveSIM Support with the exact device, location, networks shown and result for each permitted choice.
Related Articles
FAQ
Should I leave my Uruguay eSIM on manual network selection?
Usually no. Use manual selection for a controlled test and return to Automatic so the phone can adapt as the location changes.
Why can I see a network but not connect to it?
The phone lists detectable networks, including some the plan cannot use. Registration depends on permitted roaming access and current local conditions.
Will manual selection improve speed?
Not necessarily. Speed depends on signal, capacity, plan, device and location. Manual selection is mainly a registration diagnostic.
Should I change the APN when registration fails?
No. APN affects data after registration. Use data.esim only when the phone has signal and manual APN entry is required.
Final Recommendation
Use manual network selection for a Uruguay eSIM only after confirming activation, data-line choice, roaming and allowance. Give Automatic registration enough time first.
Test one permitted network carefully, record the result and use data.esim only if registration succeeds but data still requires manual APN configuration.
Restore Automatic selection when the test is finished and retain the installed eSIM. A rejected visible network is diagnostic evidence, not a reason to delete the profile.