Traveller using a smartphone in Jordan for jordan esim on iphone: installation and data settings

Jordan eSIM on iPhone: Installation and Arrival Settings

NoveSIM | Last updated on: September 3, 2026 | 3 minute read

A Jordan eSIM on iPhone requires a supported, carrier-unlocked model and the correct line selection after the profile is installed.

Menu names can vary by iOS version and region. Confirm the exact handset rather than assuming every iPhone sold under the same family name has identical eSIM support.

NoveSIM Jordan plans are data-only and do not include a local number, traditional calls or SMS.

Quick answer: Add the plan through Settings and Cellular or Mobile Service, label it Jordan Travel, select it for Cellular Data after arrival and enable Data Roaming on that line while keeping the primary line’s roaming and Cellular Data Switching off.

Top Jordan eSIMs

Check Jordan eSIM on iPhone Compatibility

Open the compatible-device list, match the exact model and confirm that Carrier Lock or the original provider allows another SIM. Look for Add eSIM under Cellular or Mobile Service.

An employer-managed phone can restrict changes even when the hardware supports eSIM. Resolve compatibility and lock questions before buying a Jordan plan.

Install the eSIM on iPhone

  1. Connect the iPhone to private, stable Wi-Fi.
  2. Open Settings and Cellular or Mobile Service.
  3. Tap Add eSIM.
  4. Scan the private QR code or use the supplied manual method.
  5. Wait for the line to appear and label it Jordan Travel.
  6. Do not scan the code again after successful installation.

Read the Jordan installation guide and the order’s activation trigger before enabling the line.

Select the Arrival Data Settings

  1. Turn on the Jordan Travel line after arrival.
  2. Open Cellular Data and choose Jordan Travel.
  3. Open the Jordan line and enable Data Roaming.
  4. Keep Data Roaming off on the primary line.
  5. Turn off Allow Cellular Data Switching.
  6. Leave Network Selection on Automatic and wait for registration.

These choices prevent a weak travel signal from silently moving mobile data to the home carrier. Calls, voicemail and SMS on the primary line can still incur roaming charges.

Enter the APN If Data Does Not Load

If signal appears but websites fail, open the Jordan line’s Cellular Data Network menu if it is available. Enter data.esim as the APN and leave username and password blank.

Do not install an unknown configuration profile when iOS hides APN editing. Use the NoveSIM APN guide or contact support.

Test and Troubleshoot the iPhone Connection

  1. Switch Wi-Fi off and open two ordinary webpages.
  2. Confirm the travel line remains selected for Cellular Data.
  3. Toggle Airplane Mode for 30 seconds.
  4. Restart the iPhone once if registration does not change.
  5. Check the plan allowance and local Jordan coverage.

Do not delete the installed eSIM unless NoveSIM Support specifically instructs you to do so. Share the model, iOS version, location and safe screenshots without exposing the activation code.

Related Articles

FAQ

Where is Add eSIM on iPhone?

Open Settings and Cellular or Mobile Service, then choose Add eSIM. Wording varies by iOS version.

Should Cellular Data Switching be on?

No, turn it off when you want to prevent fallback to the home carrier’s data.

Can the primary number remain active?

Often yes, but calls, voicemail and SMS remain subject to the home carrier’s roaming terms.

What APN does the Jordan eSIM use?

Use data.esim if manual APN entry is required.

Final Recommendation

Use a Jordan eSIM on iPhone only after confirming the exact model and unlocked status.

Choose Jordan Travel for Cellular Data, enable roaming on that line and disable data switching.

Keep the profile installed and troubleshoot line selection, registration and APN before contacting support.

←
Previous Jordan eSIM on Android: Samsung and Pixel Setup
Next How to Activate a Jordan eSIM after Arrival
→
Scroll to Top