Activate an Iceland eSIM only after the profile is already visible in the phone’s SIM settings. Arrival activation is a settings and network-registration task, not another QR-code installation.
The correct timing depends on the plan’s stated trigger. Some plans begin on first connection to a supported network; never replace that rule with a generic assumption.
NoveSIM supplies data rather than an Icelandic telephone number, so test a webpage or map instead of waiting for a local number to appear.
Quick answer: After arrival, switch on the Iceland profile, select it for Mobile Data, enable Data Roaming on that profile, keep home-line roaming and automatic data switching off, then test with Wi-Fi disabled.
Top Iceland eSIMs
Before Touching the Settings at KEF
Read the order instruction once more and confirm that the activation window should begin now. Keep the QR code private and do not scan it again when the profile is already present. If it is absent, return to the installation guide while connected to reliable Wi-Fi.
Use This Arrival Sequence
- Open SIM or Cellular settings and switch the labelled Iceland/NoveSIM profile on.
- Select it as the phone’s Mobile Data or Preferred Data SIM.
- Enable Data Roaming on the travel profile; partner-network service requires it.
- Keep Data Roaming off on the home line unless you deliberately intend to use home roaming.
- Disable automatic cellular-data switching so the phone cannot hide a failed test by using the home line.
- Leave network selection on Automatic and wait several minutes for registration.
- Switch Wi-Fi off and load a simple webpage or map.
Travellers using two active profiles should verify the data-line assignment and automatic-switching settings described above.
Find the Data-Line Controls on Your Phone
On iPhone, open Settings → Cellular or Mobile Data/Mobile Service. Select the Iceland profile for cellular data, enable Data Roaming within that profile and turn Allow Cellular Data Switching or Allow Mobile Data Switching off. The wording varies by region and software version; confirm the selected line rather than relying on its position in the list.
On Samsung, start with Settings → Connections → SIM manager and check the mobile-data SIM. On Pixel, start with Settings → Network & internet → SIMs. Find the travel profile’s roaming control and disable automatic data switching where offered. Other Android phones and regional software versions may organise these controls differently. The required result is the same: Iceland is enabled, selected for data and allowed to roam, without unintended fallback to home-line data.
Keep Your Home Number Deliberately
On a phone that supports the required Dual SIM combination, the home line can remain enabled for its number while NoveSIM carries mobile data. Selecting the travel data line does not transfer ordinary calls or carrier SMS to NoveSIM, and turning home-line Data Roaming off does not switch off the home line or prevent every possible roaming charge.
Check the home operator’s call, SMS and voicemail terms before keeping that line active. Authentication texts require the home line to be enabled and able to receive service; delivery is not guaranteed by a working NoveSIM data connection. If avoiding home-line use is more important, switch that line off only after arranging another way to access accounts that depend on SMS codes.
Label the profiles Home and Iceland so you can check the line shown before a call or settings change. Internet messaging and app calls can use the travel data allowance, but they are separate from carrier calls and SMS.
Read the Result Before Making Another Change
| Result | Meaning | Next action |
|---|---|---|
| Page loads on mobile data | Activation and the data path are working | Stop changing settings and check the allowance counter later |
| No Service or SOS | The phone has not registered | Wait, use Airplane Mode once and check location/coverage |
| Bars or 4G/5G but no page loads | Registration works; data settings or allowance may not | Check validity and use the NoveSIM APN guide |
| Home data works instead | Line assignment or automatic switching is wrong | Return Mobile Data to Iceland and disable switching |
If the First Registration Fails
Turn Airplane Mode on for about 30 seconds, reconnect and allow time for the automatic network scan. Restart once if necessary. Do not jump immediately to manual network selection or an APN change: the first addresses registration, while the second affects data after registration.
Continue with the Iceland symptom-led diagnostic if the state does not improve. Keep the profile installed and contact NoveSIM Support with the exact model, location and safe settings screenshots before considering removal.
Related Articles
FAQ
Is installation the same as activation?
No. Installation adds the profile; activation or first use begins service according to the plan’s stated trigger.
Why must Data Roaming be enabled?
A travel eSIM connects through partner networks in Iceland, so roaming must be enabled on that travel profile.
How do I know the eSIM is working?
With Wi-Fi off, a webpage or map should load while the phone shows the Iceland profile as its mobile-data line.
Final Recommendation
Activate only after installation is confirmed and the plan’s timing says service should begin.
Assign the travel line, roaming and switching settings in order, then run one clean mobile-data test.
If it fails, diagnose the displayed symptom and preserve the profile rather than reinstalling at random.



