After landing, turn on the installed travel eSIM, select it for mobile data and apply the roaming setting specified by the plan. The phone may need several minutes to register with a partner network.
Keep the home SIM from taking over data. You may leave it enabled for calls or SMS if you understand the home operator’s roaming charges.
NoveSIM travel eSIMs are data-only, so test arrival service with a browser or internet app rather than a conventional call.
Quick answer: Disable airplane mode, enable the travel eSIM, choose it for mobile data, turn on data roaming for that line when required and disable automatic data switching. Wait for registration before changing network settings.
Before leaving the aircraft
Keep the installation email available offline and confirm which label belongs to the travel profile. If the eSIM has not yet been installed, use stable airport Wi-Fi and follow the installation connectivity guidance.
Do not scan the same QR code repeatedly if setup takes time. Allow the phone to finish provisioning.
Arrival setup on iPhone
- Turn airplane mode off.
- Open Settings and Mobile Service or Cellular.
- Select the travel eSIM and turn the line on.
- Choose it under Cellular Data.
- Enable Data Roaming where required and disable Cellular Data Switching.
Arrival setup on Android
- Turn airplane mode off.
- Open SIM manager or Mobile network.
- Enable the travel eSIM.
- Select it as the mobile-data SIM.
- Apply the required roaming setting and leave network selection automatic.
For more detail on line selection, use the primary SIM and eSIM switching guide.
Test the connection
Turn Wi-Fi off and load a new webpage. Confirm that the travel line’s data counter increases. Signal bars without a working page do not prove that mobile data is configured.
If manual NoveSIM APN entry is required, use data.esim. Do not use a domestic operator’s APN or delete the profile.
If the eSIM does not connect
Wait several minutes, toggle airplane mode once and restart the phone if necessary. Confirm that the plan covers the destination and is active.
Then follow the connected-but-no-internet sequence. Change to manual network selection only when the plan instructions identify eligible partners.
Protect the home SIM
Disable mobile data on the home line or turn it off completely if calls and SMS are not required. Voicemail, calls and text services may incur operator roaming charges even when data uses the eSIM.
Related Articles
FAQ
Should I turn the eSIM on before landing?
Follow the plan’s activation instructions. You can prepare the profile in advance, but activate and connect it at the specified time.
Why must data roaming be enabled?
Travel eSIMs often connect through partner networks, so roaming may be required on the travel line. This is separate from home-SIM roaming.
How long should registration take?
It may take several minutes after arrival. Confirm settings before manually changing networks.
Should I delete the eSIM if there is no signal?
No. Check coverage, plan status, line selection and network registration while keeping the profile installed.
Final Recommendation
After landing, enable the travel line and make it the only mobile-data source while allowing time for network registration.
Test with Wi-Fi off, protect the home SIM from roaming and keep the eSIM installed during troubleshooting.
